Compact care-space footprint
Dimensions of 241 × 129 × 195 mm and approx. 1.5 kg main-unit weight support handling and space planning. Assess the complete assembled weight with liquid and accessories.

Japanese POWER SMILE S KS-710 portable suction unit, approx. 1.5 kg with a 700 mL bottle. AC adapter included; dedicated battery and car cord are optional.
Dimensions of 241 × 129 × 195 mm and approx. 1.5 kg main-unit weight support handling and space planning. Assess the complete assembled weight with liquid and accessories.
Use the supplied AC adapter. A dedicated rechargeable battery/charger and 12 V car cord are separate options that must be specified in the quotation.
The manual shows a collection bottle, float and PTFE filter assembly. Inspect and assemble correctly; do not allow overfilling or use a wet or blocked filter.
A front vacuum gauge and regulator support setting checks. Follow the healthcare professional’s specified setting rather than using the maximum figure on the data sheet.
| Specification | Details / value and unit |
|---|---|
| Model | POWER SMILE S KS-710 |
| Collection bottle capacity | 700 mL ±50 mL |
| Main unit weight | Approx. 1.5 kg, main unit only |
| Dimensions W × D × H | 241 × 129 × 195 mm, excluding protrusions |
| Maximum equipment vacuum | −75 kPa ±10% |
| Pump discharge airflow | 17 L/min ±20%, pump only; not liquid aspiration rate |
| Rated continuous operation | 30 minutes; not a guaranteed battery runtime |
| AC adapter input | AC 100–240 V, 50–60 Hz |
| Adapter output | DC 12 V / 2 A |
| Power consumption under manual conditions | 31 VA ±10% with adapter at AC 100 V |
| Car cord current | DC 12 V: 1.1 A ±10% |
| Power options | Standard AC adapter | Dedicated battery and charger: optional | 12 V car cord: optional |
| Safety classification | Class II / internally powered | Type B applied part (suction tube) | IPX3 |
| Operating environment | +5 to +35°C | 30–75% RH, non-condensing |
| Storage environment | −10 to +60°C | 10–75% RH, non-condensing |
| Atmospheric pressure | 70–106 kPa |
| Manufacturer named in manual | KOUSHIN INDUSTRIES, INC., Japan | Sole distributor: SHIN-EI INDUSTRIES, INC. |
Main unit, AC adapter, suction tube, catheter connector, hose clip, replacement filter set and manual. Confirm the final supply list.
Dedicated model-compatible options; specify and confirm compatibility. A battery is not included automatically with every unit.
Optional. This cord does not charge the battery. Follow all vehicle-use restrictions in the manual.
Ask about patient-appropriate catheters and KS-710-compatible bottles, lids, floats, seals, tubes and filters. Do not assume interchangeability with KS-700 or KS-800.
Consider for secretion-management tasks clinically assessed as suitable for a portable unit. Carers need training in assembly, checks, the patient’s prescribed technique and cleaning. Plan backup equipment or power when suction is essential to care.
The 30-minute continuous-operation rating is neither a patient suction duration nor a battery-runtime promise. IPX3 does not permit immersion. This page covers KS-710 from the supplied manual, not POWER SMILE HEART KS-800. Confirm the exact model and configuration in the quotation.
https://www.tawanmcweis.com/knowledge/how-to-choose-medical-suction-unit?lang=en
https://www.tawanmcweis.com/products/sanko-taf-w-suction-unit?lang=en
No. The manual lists the AC adapter as standard and the dedicated battery/charger as optional. Specify these when requesting a quote.
It is the equipment’s continuous-operation rating, not a recommendation to suction a patient for 30 minutes or a guaranteed battery runtime.
The manual specifies an AC 100–240 V, 50–60 Hz adapter input. Verify the supplied adapter label, plug and configuration before use.
KS-710 is a portable approx. 1.5 kg unit with a 700 mL bottle. TAF-W is an approx. 21 kg trolley with two selectable 3 L bottles. Choose by workflow, power and care plan rather than maximum vacuum alone.
Contact our team to confirm models, specifications, equipment and supply terms.